HOME
 
Accessories

Model #1000
Manhasset Music Lamp
The ultimate in attractive design and simplicity. Features include glare-free, full-width, audience-shielded illumination. It has ample clearance of even the taller scores of music, and dual clips for assured attachment, yet easily installed and removed. Complete with 40-watt bulb, 8-foot cord, and switch. Durable black enamel finish. Rigorously inspected and tested, this lamp is ETL and CSA approved, and is designed for years of trouble-free service.

Model #1920
Manhasset Short Storage Cart
The Short Stand Cart is designed to hold 12 to 13 music stands. Since it has an overall length of less than 5 feet, it can easily fit in most elevators. It also takes much less storage space than most other music stand storage carts. It is made to the same strict standards and of the same high quality as our larger storage cart. With its welded steel construction, durable powder coated finish, high-density polyethylene rail liners and roller bearing wheels, it will provide service for years to come. It comes packaged with all the nuts and bolts necessary to easily assemble in minutes.

Model #2800
Manhasset Accessory Box with Accessory Hanger
This Accessory Box will finally allow musicians to have the music stand storage they have needed. The box dimensions are 10 inches long by 6 inches wide and it has a box depth of 2-1/2 inches - so it will hold all the supplies and accessories (such as pencils, valve oil, mouth pieces, rosin, cleaning supplies, reeds, and you name it) you have to have - and at a "no-reach required" convenient location, right below the music stand desk. In addition it has a built-in holder for your water bottle or cup, as well. The unit's hanger is designed to fit on any Manhasset music stand and provide a securely fitting container unequalled in accessibility and convenience. This Accessory Box unit can be installed in an instant and removed just as easily.

Model #2400
Shaft-Lock
Our standard shaft easily holds 10 to 12 lbs. However, for applications requiring greater weight carrying capacity, our Shaft-Lock fits the bill. It is easily retrofitted onto all Manhasset music stand shafts, instantly allowing you to have your stand (shaft) support up to 75 lbs. With its fingertip twist mechanism, you can quickly adjust and lock the height at any position. In the unlocked position, the music stand is allowed to function in the normal fashion.

Model #2600
Table-Lock
When you need to hold a desk in a stable horizontal position, the Table-Lock is the answer. The Manhasset Table-Lock is ideal for converting Manhasset music stands for use with synthetic drum pads, keyboards, or other applications requiring a flat platform. In moments, this accessory can be fitted on all standard necked Manhasset music stands (all except the voyager portable stands). With only two screws, your stand is converted to a table platform that is locked in the horizontal position.

Model #3000
Microphone Stand
The features of this Microphone Stand make it the right choice for musicians and vocalists. It includes a connecting adapter made for the most popular mic holder's thread size. The height adjustment ranges from 38" to 64" - providing the ideal height for virtually all applications. Portability of this Microphone Stand is unbeatable. Instead of using a heavy base, it utilizes a collapsible tripod base for amazing stability. Weighing less than 2.7 lbs., it can be easily transported and stored. Also, with the same Magic Finger Clutch used in our music stands, the height adjustment can be easily made with just one hand. In addition, by using the same look as our music stands, it conveniently blends and fits with Manhasset music stands.

Model #3000 C
Concertino Microphone Stand
This shorter version of the Microphone Stand has all the same features and benefits. The height adjustment ranges from 18" - 30", making it perfect for lower setting needs. This Concertino Microphone Stand is perfect for seated musicians including acoustic guitarists, cellist and harpist.

Model #1100
Manhasset Accessory Shelf
Accessory Shelf provides storage at your fingertips! This durable ABS plastic shelf slides onto the ledge of your stand, instantly converting it to a double lipped orchestral stand. This shelf that is 16 inches long, provides convenient storage for your music paraphenalia.

Model #1200
Manhasset MusiClip
A transparent, highly durable plastic clip that makes playing in the wind a breeze. MusiClips clamp over the entire length of your music for a firm, secure grip. They eliminate unsightly and awkward clothespins or fasteners, making page turning much easier. MusiClips accommodate large collections of music and fit all music stands.

Model #1300
Manhasset Violin/Viola Holder
An adjustable holder for violin and viola and bows. Clips on the lip of all folding and concert music stands. Holds violin or viola and bows securely. Stores conveniently in the case.

Model #1320 & #1340
Manhasset Mute/Cup Holders
Clips on the lip of all folding and concert music stands. Places mutes or cups in convenient, readily accessible place. Allows for quick mute changes during performances.




Model #1400
Manhasset Wind Instument Stand
This unique device converts the base of a Manhasset Music Stand into a stand for flute, piccolo, oboe, clarinet, recorder (sopranino, soprano, alto, tenor, F bass) or trumpet. One adapter holds up to three pegs (listed below) to accommodate three instruments. A must for all wind instrument players. All peg accessories (listed below) sold separately.

*** Wind Instrument Stand shown here with the # 1420 Dual Peg Adapter

Model #1500 & #1520
Manhasset Stand-In
Stand-In Instrument stands for Trumpet, Flugelhorn. They actually fold up and store conveniently inside the bell of their instrument (for storage and transport) inside the case. Durable, adjustable, yet amazingly lightweight and stable.

Model #1600
Manhasset Choral Folder
A revolutionary choral folder with a lip along the bottom to prevent music from falling out of the folder. An adjustable, elastic band mounted on the back side of the folder prevents muscle strain in the supporting hand and facilitates page turning. This is the choral folder everyone has been waiting for!

Model #1650
Manhasset Fourscore Folder
A music folder which extends the desk width of any music stand to a full 34 inches -- wide enough to hold 4 pages of music. Folds into standard width when not in use as an extender. Elastic security band holds folder snugly to music stand. Works equally well on piano, organ or synthesizer. Made of durable, heat-sealed class 100 vinyl with 80 pt. chipboard core.

Model #70
Manhasset Repair Kit
After 20 or more years of service, it is possible that the base adapter and shaft fastener may become loose. This repair kit will replace the potentially worn parts on music stands manufactured between the years 1935 and 1969 and prevent wobbling, and make the stand as solid as it was when it was new. These components have been standard on all music stands made since 1970.

Model #1700
Manhasset Floor Protectors
The Manhasset Floor Protectors protect against those expensive to repair scratches, marks and gouges in wood or tile floors. Each vinyl protector slips easily onto the base "toes" and stay firmly in place to prevent any unnecessary scratching of floor surfaces. Excellent for use in gymnasiums, on stages, churches or anywhere floors need to be protected from stand use. Works on all standard Manhasset bases.

Model #1800
Manhasset Voyager Tote Bag
An excellent compliment to the portability of the Voyager Music Stand, this durable nylon tote bag is designed to efficiently transport your Voyager Stand. It features a comfortable shoulder strap and provides ample room for books or sheet music, or personal effects.

Model #1910
Manhasset Storage Cart
Holds up to 25 concert music stands, this unit is built to allow easy racking and removal of music stands and provides convenient storage. It is made to strict high-quality standards, and with its strong welded steel construction, durable powder-coat finish, and roller bearing wheels, it will provide service for years to come. It comes packaged with all the nuts and bolts necessary to easily assemble in minutes. Its dimensions of 92 inches long by 43 inches high by 22 inches wide and ヨ along with its pivot center axle allows it to maneuver easily on all floor surfaces.

Now this cart also comes with high-density polyethylene rail liners to provide even more protection to the music stands it holds.

Model #2000
MANHASSET® Acoustic Shield
We are pleased to introduce Manhassetメs New Acoustic Shield.

The 22" high by 26" wide shield is made of clear, durable Lexan polycarbonate. It is designed to effectively provide hearing protection to the musician stationed in front of other musicians, yet not causing impaired vision for the musician behind.

The unitメs height adjustment range will afford protection for the musician while sitting and, since, when extended, it has a height of 66 inches, it can also provide hearing protection to the standing musician. In addition to offering hearing protection for musicians playing in front of loud instrumentalists, shields can be easily positioned around percussion sections to reduce the hearing impact on other musicians. Beyond the benefits of acoustic shielding, this device also functions as deflector for french horn players, when placed behind the bell.

The shield contracts and folds down to a height of 37" allowing it to be comfortably tucked away behind your chair when not needed. Also, the shield is equipped with a collapsible tripod base that makes it very portable and easily transported.

The MANHASSETᆴ Acoustic Shield also has a 1 1/2" ledge, so it easily doubles as a fully-functioning music stand for directors or those desiring a larger music desk, yet not wanting to sacrifice visibility.
Model #1670
Model #1670 Manhasset Wrench
This is a great tool for the music teacher or those who have a combination of older (pre-1995) stands and newer stands. It incorporates both size sockets used to install/tighten the bolt that attaches the base to the shaft (a 9/16-inch one for the older and a 17mm socket for the modern stands. Even if your band room includes all old or includes all new stands, this wrench is still a valuable tool for conveniently taking care of installation and/or maintenance tasks. The handle length is sized to provide the right leverage to easily tighten the bolt.